Your computer screen turns blue with a few words, and it restarts out of nowhere. When this phenomenon happens, your computer has crashed Windows 10. The Blue Screen Of Death (BSOD) is the random blue screen. The BSOD contains an error code that helps you understand why your computer crashed Windows 10.
Simply pick the error code and search it in the window’s action center to get clear reasons and solutions to why your computer crashed Windows 10. However, the BSOD disappears very quickly before you record the error code.
There are various possible reasons why your computer Windows 10, but you have to determine the specific one to avoid future crashes. Some of the primary causes are; malfunctioning of the hard drive or RAM, virus, overheating, wrong drivers, and weak power supply. You may be interested in this also: The Laptop You Need For Your Photography.
The reliability monitor and the event viewer are in-built tools for Windows 10, and they will help you analyze the system crash.
Analyze The Reliability Monitor
A reliability monitor is a unique tool that has been useful since Windows 7. It helps you easily access why your computer crashed Windows 10 by giving you a graph of all critical events when and before the crash. This tool will not give you the exact reason buy you have to use the events to get to a solution. Here is how to view the reliability monitor in Windows 10.
Step one
Open the Windows 10 search box and type in it “Reliability,” and select “View Reliability History,” and the main interface of the reliability monitor will open.
Step two
Events are arranged from the current on the left to the oldest on the right. The “X” in a red circle showed when the crash happened and all critical events running during that time.
Step three
All critical events are listed at the bottom, and you can choose to click on one critical event and get more details. Analyze your reliability monitor, and you will get the event causing most crashes.
Use The Event Viewer
The event viewer will provide the error codes that appeared on the BSOD. The event viewer outlines the errors, information, and warnings the operating system created before the crash. In the event viewer, you will get regular events that were running perfectly right before the system crashed.
You will also get warnings of future causes of failures and crashes, but currently, they are running perfectly. And the last category is the error section which shows all error codes that explain why the system crashed.
Step one
Open the search box in your Windows 10 and type in “Event Viewer,” and choose the best match right below the main menu. And click on “Event Viewer” to launch the window. Then click on “Windows Logs” and select “System,” where you will find all earlier crash codes displayed on BSOD.
Step three
Nevertheless, all crash codes are organized in minimal time difference levels. It will be tiresome to go through all levels, so click on the first column labeled “Error,” and critical events will appear in a separate window.
Custom View For The Event Viewer
The best way to view error codes is to use the custom view option. Here you have to create the time frame you want to view the error codes. Use the following step to create the custom view of error codes.
Step #1
After opening the event viewer, navigate to the right side of your screen and click on “Create a Custom View,” and a pop-up window will appear.
Step #2
Select the time frame you want to view the critical events from the pop-up window. Experts suggest you choose 12 hours. And tick the checkboxes labeled “Critical,” “Error,” and “Warning” under the event level section.
Step #3
Navigate down to the “By Log” option and click on a drop-down icon that will show a few options. From the drop-down menu, select “Application,” “Security,” and “System.” And click on the “OK” button.
Step #4
A small window will appear requiring you to name the custom view, name it and click on the final “OK” button, and the error codes in the time frame selected will appear.
What To Do When Your Computer Crashes Windows 10
Turn Off The Auto-restart Option After BSOD
Windows 10 was a default setting to restart once your computer has been crushed. So you have to disable auto-restart so that you can record the error logs displayed on the screen. Remember the error code is the ultimate solution to fixing the crash on the system. The following steps will help you to disable the auto-restart.
Step one: Right-click on the “This PC” icon and select “Properties.”
Step two: Choose “Advanced System Settings” from properties and select “Settings” below the “Startup & Recovery” options.
Step three: Navigate to the system failure section and untick “Automatic Restart.” And finish up with “OK” to save all changes.
Inspect For Viruses
When you did not disable the auto-restart option, inspect your computer for viruses immediately restarts. Your computer crashed Windows 10 because viruses have corrupted essential data in the system. Windows 10 has an in-built antivirus called Windows defender. Try using Windows Defender to scan for viruses before you use another antivirus.
The Windows defender can scan and remove any malware in the system for free. If you choose to use antivirus, select versions compatible with Windows 10 and can remove viruses if they find them.
Inspect Your Windows, Hardware, and Drivers Update
Windows 10 update is not a problem because it has a default auto-update setting. But watch out for the drivers because they can be the cause your computer crashed Windows 10. However, most drivers have an auto-update option, but some require you to download them. In addition, ensure the firmware like BIOS and UEFI are up to date.
You should note that the system drivers run the computer’s hardware and when good drivers will show wrong drivers in your computer. Remove the hardware if it is faulty. Sometimes, faulty hardware can make your computer overheat. Replace or clean the cooling fan and add cooling paste to the CPU.
Run a System Restore
Sometimes your computer crashed Windows 10 immediately after updating a few software and drivers. To confirm if this is the cause, you must do a system restore process that takes you back to the previous state. Doing so will uninstall all new updates and software and reinstall those you had deleted. This process takes up some time but uses the procedure below to do it.
Step one: Go to your start-up menu and type “Recovery,” Once you hit enter, a recovery control panel will appear.
Step two: Next, click on “Open System Restore” to open the window and click on “Next” to see a few options you can go back to.
Step three: Choose one of the options and click on “Scan for Affected Programs” to get the specific software that caused your computer to crash Windows 10.
Start Your Computer In Safe Mode
This is the ultimate solution when your computer crashed Windows 10. Booting your computer in safe mode starts with only the necessary software and drivers running. All other third-party applications will be left out. You can even scan your computer for viruses when it is in safe mode. You can press the F8 key when your computer starts up or use the steps below.
Step one: Launch settings and click on “Update & Recovery,” where you will select “Recovery.”
Step two: Click on “Advanced Startup” and select “Restart Now,” An advanced start-up screen will appear.
Step three: Click on “Troubleshoot,” and another window will open where you will choose “Startup Settings” and click on “Restart,” and your computer will boot in safe mode.
Reinstall Windows 10
Reinstalling is the final decision you can opt to use when your computer crashed Windows 10. The good news is that Windows 10 has an in-built tool for clean installation; hence no need for independent installation media. When your computer still crashes after reinstallation, then it is a hardware issue.
How To Reinstall Windows 10
Reinstalling is the final solution when your computer crashed Windows 10. But there are some complex ideas you should know about reinstalling Windows 10. First, you must back up all of your data because you can quickly lose them. Use an external hard drive or back them to the cloud.
When reinstalling, you can choose to keep your files or remove all of them. Keeping your files means all installed apps will disappear, but music and documents will remain. On the other hand, removing all files means nothing will remain after reinstalling Windows 10.
There is the local reinstall and cloud reinstall. The local reinstall means a fresh copy of Windows 10 is created from the current files on your computer. On the other side, cloud download/reinstall is when you download a new copy of Windows 10 from the internet. The new copy will have a few updates, and the process requires a fast and steady internet connection.
Procedure Of Reinstalling Windows 10.
Step #1. Navigate to “Settings” and click on it.
Step #2. Scroll down and click on “Update & Security,” then click on “Recovery.”
Step #3. Navigate to a header labeled “Reset this PC” and click on “Get Started.”
Tips On Protecting Your Computer From Viruses
Viruses and malware are some of the reasons your computer crashed Windows 10. And a computer virus is any dangerous program or code fashioned to alter the normal operations of your computer. A computer virus can copy itself and spread to other devices and computers. Frequent crashes on your Windows 10 are clear signs of a virus present.
Use the tips below to prevent future virus attacks on your computer.
Use an Antivirus
This is the first protective thing you should do, although Windows 10 has the in-built Windows defender. But you have to update your Windows 10 every time so that the defender also becomes up to date. Please note people create new viruses every day, so updates are essential for more potent viruses. Also, install antiviruses from other companies for maximum protection.
Be Careful With Unfamiliar Emails
The fastest way to spread a virus is through email. So do not open unknown emails and email attachments. The virus will be in your system once you click on the link, open attachments you were expecting, and avoid unfamiliar ones.
Have a Pop-up Blocker On Your Web Browser
Most pop-up characters on the web browser contain viruses, and a pop-up blocker will help you restrict such features. Windows 10 has a default pop-up blocker that is always on unless you turn it off. Also, ensure you turn on the privacy setting on your web browser or are at risk of identity theft.
Use Super-strong Passwords
Anyone can access your files and attach a virus to them even through wireless connections with a weak password. So try and have strong passwords which are easy to remember. A good password should include letters, numbers, and symbols and be at least eight characters long. Avoid using similar passwords in all of your accounts.
Backup Your Information
Stubborn viruses won’t go away, so you need to back up your hard drives in other storage devices. As you try to remove the virus, you can damage the operating system, hence reinstalling, leading to loss of data. And always do periodic malware scanning to make sure your computer is safe. Experts recommend a weekly scanning updating of antivirus.
Conclusion
The BSOD is the first thing you will see when your computer crashed Windows 10. And it contains a vital error code that will help you know why it has crashed. To permanently disable the auto-restart option after the BSOD so that you can note the error code. But when it is impossible to get the code, search for it in your system using the event viewer.
The event viewer will give you the error code and other warnings that can be dangerous to your Windows 10. Analyzing the reliability monitor will also help you determine the critical events when the crash happened. It will not give you the error code, but you will know the events that led to the crash.
